Abnormal Problems With The Clutch

1. Pay attention to whether the clutch slips, there are several reasons for such phenomena, the main reason is that the free stroke of the clutch pedal is too small, and the release bearing is often pressed on the diaphragm spring, so that the pressure plate is always in a semi-separated state. Or the clutch pressure plate spring is too soft or broken, and the screw connecting the clutch and the flywheel is loose.

2. In the engine idle state, when the clutch pedal is almost touched, the clutch can be cut off. Pressing the clutch pedal, feeling difficulty in gearing or a harsh crash sound in the transmission gear, or not lifting the clutch pedal after gearing, the vehicle starts to drive, which indicates that the clutch of the car is not completely disengaged.

3. When pressing the clutch pedal to 3/4, the clutch should be firmly engaged, otherwise check whether its stroke is appropriate, you can use a ruler to measure at the pedal, first measure the highest position height of the pedal, and then measure the height when you press the pedal to feel resistance, the difference between the two values is the clutch stroke value of the car.

4. If there is abnormal noise during the use of the clutch, it is also abnormal. The causes of the failure are serious wear of the release bearing, the bearing return spring is too soft or broken, and the diaphragm spring bracket is faulty.